APPLICATION
Apply the diluted STENCIL REMOVER 1:20/1:50 concentrate solution with a soft, clean brush evenly on both sides of the screen after the screen has been carefully cleaned of ink residue. Rub the screen gently with a brush to dissolve the emulsion. After approximately 2 minutes, rinse thoroughly with a strong water spray. A high pressure water spray (1000 - 2000 psi, 40 - 60 bar) may be required for highly water resistant emulsions. Prolonged reaction time may result in reverse effects and does not help in the de-coating process. Rather, rinse the screen and reapply fresh STENCIL REMOVER 1:20/1:50 concentrate. Ensure that the STENCIL REMOVER 1:20/1:50 concentrate solution does not dry on the screen. This can lead to a hardening of the emulsion and the resulting emulsion residues will be extremely difficult to remove. For automatic equipment a dwell time of 60 -120 seconds after applying the de-coating solution is sufficient. If not all emulsion is removed, a second reclaiming cycle should be used to completely remove the emulsion.
Shelf Life - 2 years at 68° F (20° C)
Color - Clear
