Northwest Graphic Logo

Emulsion Removers

Browse Categories
  1. Home
  2. SCREEN CHEMICALS
  3. Emulsion Removers
This is a liquid which is applied to screens to dissolve the emulsion. It can be sprayed or brushed onto a dry screen and allowed to set for 5 minutes. Then, a pressure washer should be used to remove any emulsion residue. Ideal for tank use without heat. Available in square, dispensing, 5 gal cubes.
6000 Emulsion Remover
These SMP crystals are the same as used to make the liquid removers above, except without the water. Two ounces of powder are used for each gallon. Available from a 2 ounce size (premeasured for one gallon) to 110 ounce for a 55 gallon drum.
6002 Emulsion Remover Powder
6100 is designed to be mixed 3 to 1 with water which saves shipping costs. This is a liquid which is applied to screens to dissolve the emulsion. It can be sprayed or brushed onto a dry screen and allowed to set for 5 minutes. Then, a pressure washer should be used to remove any emulsion residue. Ideal for tank use without heat. Available in square, dispensing, 5 gal cubes.
6100 Emulsion Remover Concentrate
This is a liquid acid based concentrate must be reduced with water before use. Should be mixed 1 part concentrate to 15 parts of water for Automatic emulsion removers. Can be reduced to 50 to 1 or more for hand emulsion removal.
6415 Super Concentrate Remover
STENCIL REMOVER 1:20/1:50 concentrate is a highly concentrated liquid emulsion remover for de-coating polymer-based direct emulsions and capillary films. STENCIL REMOVER 1:20/1:50 concentrate provides maximum efficiency when diluted with 20 parts water but may be diluted with up to 50 parts water depending on the type of emulsion and desired effectiveness. STENCIL REMOVER 1:20/1:50 concentrate does not crystallize when drying and is suitable for use in automatic reclaiming equipment.
KIWO Stencil Remover 1:20/1:50
A safe, effective enzymatic specially formulated for faster action and better results in removing indirect photo stencils from all types of fabric. Odorless.
Ulano Enzyme
Ready-to-use paste for fast and thorough removal of direct emulsions, CDF Direct Films, and Pulsar indirect film from all types of mesh including metalized polyester.
Ulano #4 Emulsion Remover
Ready-to-use stencil liquid remover for fast and thorough removal of direct emulsions, CDF Direct-Films, and Pulsar indirect film from all types of mesh including metalized polyester. Will not etch mesh; contains no strong alkalis or hypochlorites. Ideal for use in tanks: will not attack adhesives on stretch and glue frames; tank heating unnecessary. Odor free
Ulano #5 Stencil Remover Paste