High Opacity Black

SPECIFICATIONS:

USES: For use on metals, ceramic tiles, glass, phenolics, rigid plastics, and polyethylene.

FINISH: Dries to a high gloss finish.

COVERAGE: Averages about 1,000 sq. ft. per gallon.

OPACITY: Excellent opacity; transparent colors are also available.

DRYING TIME: Approximately 30 to 60 minutes at room temperature. This series can be forced dried 3 to 5 minutes at a minimum of 150 to 180°F. For best chemical resistance bake for 7 minutes at 350 to 370 °F

MIXING INSTRUCTIONS: PP-91-999 Catalyst is required with PP-91 Series ink and must be ordered separately. An 8 oz. container of catalyst is normally used with a quart of ink, and a quart container of catalyst is normally used with a gallon of ink. Add 1 part Catalyst to 4 parts ink. Catalyst pot life is normally 4-6 hours; shorter at elevated temperature. Baking will produce hard, unscratchable prints. For Metallic colors use PP-91-999A Curing Agent.

SCREEN FABRIC: Use a 200-305 monofilament fabric.

SCREEN COATING, FILM, BLOCKOUT: Direct and indirect photostencils, or water soluble, knife-cut stencils are suitable.

MODIFIERS: Use SYS-1976 for fast thinner or PP-91-805 for reduction. To extend add PP-91-825. To subdue the gloss finish mix PT-83 Flattening Powder. Under hot and dry conditions, use T-980 or PP-91-810 to retard drying.

ADHESION: Excellent on most substrates.

WASHUP: Use SYS-1925 Washup or biodegradable washes 2500 or 2510 screen wash gel.