USES: For use on cottons, cotton/polyester blends, can be used on both hot and cold peel transfers, and on nylon jackets (with the addition of Nylobond Bonding Agent).
FINISH: Cures to a soft-hand finish.
PLUE Series inks will fully cure and withstand repeatedOPACITY: Excellent opacity on light and medium colored shirts. Not recommended for dark fabrics without a white under base.
semi-cure or gel at 250°F for transfers.DRYING TIME:PLUE Series plastisol inks will not air dry. They must be heat cured. PLUE Series inks will fully cure and withstand repeated washings when the entire ink deposit reaches 300°F. Curing can be accomplished with the use of a conveyor dryer, flash curing unit, or simple infrared heater. Will semi-cure or gel at 250°F for transfers.
water soluble hand-cut, photo screens and blockouts withSCREEN FABRIC: Use 86-305 monofilament polyester depending on the substrate.
SCREEN COATING, FILM, BLOCKOUT: Use water soluble hand-cut, photo screens and blockouts with this ink or use other suitable products.
MODIFIERS:Use UPLUE-9090 Extender Base to extend colors and add strength. Use UPLRE-9000 as a reducer or detackifier. For metallic and fluorescent powders use UPLUE-9030.
WASHUP: T-125
ADHESION: Excellent on 100% Cotton and blends.
or SYS-2510 screen wash gel.WASHUP: T-125 mineral spirits, or biodegradable washes SYS-2500, SYS-2550 or SYS-2510 screen wash gel.
ALWAYS TEST PRINT BEFORE PRODUCTION!
| Qty | Break |
|---|---|
| 1 | $ 543.32 |
| 5 | $ 516.15 |
| 10 | $ 488.99 |
| 15 | $ 461.82 |
| 20 | $ 434.66 |
| Qty | Break |
|---|---|
| 1 | $ 111.94 |
| 4 | $ 106.34 |
| 8 | $ 100.75 |
| 12 | $ 95.15 |
| 20 | $ 89.55 |
