Peach

SPECIFICATIONS:

finish.

USES: For use on cottons, cotton/polyester blends, can be used on both hot and cold peel transfers, and on nylon jackets (with the addition of Nylobond Bonding Agent).

FINISH: Cures to a soft-hand finish.

PLUE Series inks will fully cure and withstand repeated

OPACITY: Excellent opacity on light and medium colored shirts. Not recommended for dark fabrics without a white under base.

semi-cure or gel at 250°F for transfers.

DRYING TIME:PLUE Series plastisol inks will not air dry. They must be heat cured. PLUE Series inks will fully cure and withstand repeated washings when the entire ink deposit reaches 300°F. Curing can be accomplished with the use of a conveyor dryer, flash curing unit, or simple infrared heater. Will semi-cure or gel at 250°F for transfers.

water soluble hand-cut, photo screens and blockouts with

SCREEN FABRIC: Use 86-305 monofilament polyester depending on the substrate.

SCREEN COATING, FILM, BLOCKOUT: Use water soluble hand-cut, photo screens and blockouts with this ink or use other suitable products.

MODIFIERS:Use UPLUE-9090 Extender Base to extend colors and add strength. Use UPLRE-9000 as a reducer or detackifier. For metallic and fluorescent powders use UPLUE-9030.

WASHUP: T-125

ADHESION: Excellent on 100% Cotton and blends.

or SYS-2510 screen wash gel.

WASHUP: T-125 mineral spirits, or biodegradable washes SYS-2500, SYS-2550 or SYS-2510 screen wash gel.

ALWAYS TEST PRINT BEFORE PRODUCTION!