USES: Most plastics, including: Acrylics such as Plexiglass and Lucite; rigid, semi-rigid and flexible vinyls, especially fleet marking films by 3M, Avery and Flexcon, foamed vinyl sheets such as Sintra, Trovicel, etc. Other plastics: styrene, top-coated or otherwise print treated polyester, polycarbonates such as Lexan. Other substrates: many coated and uncoated metals, glass, Foam Boards, coated and uncoated paper and wood.
FINISH: Cures to a gloss finish.
COVERAGE: About 1200 Sq. Ft./Gallon
OPACITY: Good on most colors
DRYING TIME: Force dries in seconds with high efficiency dryers (3000-5000 CFM fresh air equipped with air knives) at 100-120°F for 30-60 seconds. Air dries in 15-45 minutes depending on temperature and air circulation. Adding retarder will slow dry times.
SCREEN FABRIC: Use 160 to 300 polyester monofilament for high print quality.
SCREEN COATING, FILM, BLOCKOUT: Direct and indirect photostencils, or water soluble, knife-cut stencils are suitable.
MODIFIERS: Reduce with PA-601, Retard with PA-621. To improve flow, use PA-620 (no more than 2 oz. per gallon).
ADHESION: Excellent for recommended substrates.
WASHUP: PA-610, SYS 1925. or biodegradable washes 2500 or 2510 screen wash gel.
ALWAYS TEST PRINT BEFORE PRODUCTION!
| Qty | Break |
|---|---|
| 1 | $ 159.95 |
| 4 | $ 151.95 |
| 8 | $ 143.96 |
| 12 | $ 135.96 |
| 20 | $ 127.96 |
| Qty | Break |
|---|---|
| 1 | $ 181.20 |
| 4 | $ 172.14 |
| 8 | $ 163.08 |
| 12 | $ 154.02 |
| 20 | $ 144.96 |
| Qty | Break |
|---|---|
| 1 | $ 72.40 |
| 4 | $ 68.78 |
| 8 | $ 65.16 |
| 12 | $ 61.54 |
| 20 | $ 57.92 |
