APPLICAITONS
Print through screen mesh up to 110 mc in (43 mc cm) when cured at 320° F (160° C), Foil Adhesive TFG 301 produces the softest prints achievable in textile screen printing today. Transfer press settings: Temperature 330° F-350° F (166° C-177° C), 8-20 seconds, and 40-60 psi. All heat press manufacturers are subject to different settings, be sure to test your equipment.
SPECIAL RECOMMENDATIONS
Foil Adhesive TFG 301 should be mixed in clean vessels using clean mixing blades and utensils. Any contamination from other ink sources or non-approved additives could make Foil Adhesive TCG 301 test positive for restricted PVC's. Use retarder MG 1-5% to help with open time in the screen. Use thickener B .25-1% to help thicken the ink.
Wet Ink Tack - Low
After Flash Tack - Low
Printability - Excellent
Surface Appearance - Gloss
Opacity/Viscosity - Low/Low
Bleed Resistance - None
Flash Temperature - 160° F (71° C)/decreases with deposit thickness
Cure Temperature - 320° F (160° C)
Squeegee Hardness - Medium
Squeegee Blade - Sharp
Squeegee Angle - 45 degrees to screen
Underlay - N/A
Emulsion - Direct or Indirect
Mesh Count - 60-110 mc in (24-43 mc cm)
Thinner - N/A
Thickener - Thickener B
Storage - 65° F to 95° F (18° C to 35° C). Avoid direct sun.
Cleanup - Water and mild soap or detergent
Color Range - White
Substrate Type - All
Substrate Color(s) - Light, Medium, and Dark Fabrics.
| Qty | Break |
|---|---|
| 1 | $ 310.00 |
| 5 | $ 294.50 |
| 10 | $ 279.00 |
| 15 | $ 263.50 |
| 20 | $ 248.00 |
| Qty | Break |
|---|---|
| 1 | $ 99.75 |
| 4 | $ 94.76 |
| 8 | $ 89.78 |
| 12 | $ 84.79 |
| 20 | $ 79.80 |
