USES: For use on cottons, cotton/polyester blends, can be used on cold peel transfers, and on nylon jackets (with Nylon Bonding Agent).
OPACITY: Excellent on all shirt colors.
DRYING TIME: Plastisol inks will not air dry. They must be heat cured. ColorPro inks will fully cure and withstand repeated washings when the entire ink deposit reaches 310°F. Curing can be accomplished with the use of a conveyor dryer, flash curing unit, or simple infrared heater. Will semi-cure or gel at 250°F for transfers.
TRANSFERS: Transfert 75 paper is recommended. For increased durability, use adhesive powder or print 841 or 842 adhesive over the entire transfer. Set transfer press for medium pressure for 10-15 seconds at 350° F. Peel cold. ColorPro is available in Lancer 951 Series for hot split transfers.
SCREEN FABRIC:Use 40-305 monofilament polyester depending on the substrate for direct prints, 80-125 mesh for transfers.
SCREEN COATING, FILM, BLOCKOUT: Use water-soluble, hand-cut photo screens and blockouts with this ink or use other suitable products.
MODIFIERS: Use small amounts of Lancer 502 reducer to achieve the look of a water based print. Any amount of 502 curable reducer can be used to reduce opacity and soften hand.
ADHESION: Excellent on most fabrics.
WASHUP: Use SYS-1925 or biodegradable washup SYS-2500, SYS-2550 or SYS-2510 screen wash gel.
ALWAYS TEST PRINT BEFORE PRODUCTION!
| Qty | Break |
|---|---|
| 1 | $ 512.50 |
| 5 | $ 486.88 |
| 10 | $ 461.25 |
| 15 | $ 435.63 |
| 20 | $ 410.00 |
| Qty | Break |
|---|---|
| 1 | $ 118.35 |
| 4 | $ 112.43 |
| 8 | $ 106.52 |
| 12 | $ 100.60 |
| 20 | $ 94.68 |
