The GLL Series ink was formulated for indoor and medium-term outdoor exposure for a wide variety of substrates. The GLL Series has an extensive range of colors including four-color process and transparent colors. Formulated with a gloss finish this series air dries quickly.
USES: For use on nitrocellulose lacquer (pyroxilin)-coated stocks (fabric or paper), card, paper, some primed metal, cellulose-based plastics and coated foils.
FINISH: Dries to a gloss finish.
OPACITY: Good opacity for most colors.
COVERAGE: Averages about 2,100 sq. ft. per gallon using 280 meah polyester.
DRYING TIME: GLL Series dries by evaporation. Prints normally air-dry within 20 to 40 minutes, or 10 to 50 seconds on a jet dryer at 150°F to 200°F.
SCREEN FABRIC: Use a 200 or coarser mesh to achieve greatest opacity. Up to 305 mesh counts can be used for finer detail when necessary.
SCREEN COATING, FILM, BLOCKOUT: Direct and indirect photostencils, or water soluble, knife-cut stencils are suitable.
MODIFIERS: Direct and indirect photostencils, or water soluble, knife-cut stencils are suitable.
FLOW AGENT: GLL-1870.
RETARDER: To improve screen stability, or under hot shop conditions, use some or all Slow Thinner GLL-1820.
ADHESION: Excellent on most substrates.
WASHUP: Use GLL-1840, SYS-1925, or biodegradable washups 2500 or 2510 screen wash gel.
ALWAYS TEST PRINT BEFORE PRODUCTION!
| Qty | Break |
|---|---|
| 1 | $ 373.12 |
| 4 | $ 354.46 |
| 8 | $ 335.81 |
| 12 | $ 317.15 |
| 20 | $ 298.50 |
