USES: Suitable for most vinyl or vinyl-coated surfaces (including highly plasticized vinyl), polycarbonate coated polyester film and especially 'back-lit awning' substrates.
FINISH: Dries to a high-gloss finish.
OPACITY: Excellent opacity on opaque colors. Transparent colors are bright and clear.
COVERAGE: Approximately 2500 sq. ft. per gallon using a 280 monofilament fabric, and a sharp squeegee (i.e. machine printing).
DRYING TIME: AM Series dries by evaporation. Prints normally air dry within 10 minutes with good air circulation, or jet dry within 30 seconds at 120°F. Overprints require slightly longer drying time.
SCREEN FABRIC: All fabrics are suitable. We recommend a minimum of 160 mesh and a maximum of 380 mesh.
SCREEN COATING, FILM, BLOCKOUT: Direct and indirect photostencils, or water-soluble knife-cut films are suitable.
MODIFIERS: Ink may be used straight from can, but 10-20% thinning is recommended with AM-1800 thinner for optimum printing. For mixing metallic powders use AM-1700.
RETARDER: Under hot and dry conditions, use VP-182 Slow Thinner.
WASHUP: Screen cleans with SYS-1925 Lacquer Washup, VP-184 or biodegradable washes 2500 or 2510 screen wash gel.
ALWAYS TEST PRINT BEFORE PRODUCTION!
| Qty | Break |
|---|---|
| 1 | $ 354.90 |
| 4 | $ 337.16 |
| 8 | $ 319.41 |
| 12 | $ 301.67 |
| 20 | $ 283.92 |
