Northwest Graphic Logo

CRP Series Corrugated Plastic Ink

Browse Categories
  1. Home
  2. SOLVENT BASED INKS
  3. Corrugated Plastic Inks
  4. CRP Series Corrugated Plastic Ink


CRP Series Corrugated Plastic Ink

Features:

  • Tough water-proof film
  • High gloss finish.
  • Good opacity
  • Extensive color range.
  • Fast drying.
  • Low odor

Description:

A high gloss ink formulated for corrugated plastic sheets

The CRP Series ink was formulated for indoor or outdoor use. Suitable for most corrugated plastic sheets extruded from special co-polymer resins and surface treated to a level of 50 dynes/cent. or better. These inks have excellent scuff resistance and demonstrate excellent adhesion and water resistance on correctly treated surfaces.

Read More

SPECIFICATIONS:

USES: Corrugated co-polymer resin sheets (e.g. Coroplast, Prime Cor-X, etc.) Good adhesion on some polypropylene, paper, card, etc.

FINISH: Dries to a high gloss finish.

OPACITY: Good opacity for most colors.

COVERAGE: Averages about 2,000 sq. ft. per gallon using 230 mesh monofilament.

DRYING TIME: CRP Series dries by evaporation. Prints normally air-dry within 30 minutes, or 30 to 60 seconds on a jet dry at 130°F. Overprints may require slightly longer due to rewetting of previous color. Ensure adaquate air circulation when rack drying.

SCREEN FABRIC: All fabrics are suitable; however, for optimum characteristics and good outdoor durability, use 200 to 250 monofilament mesh. Greatest opacity is achieved using 200 mesh monofilament or coarser fabric. For double sided or work requiring scuff resistance use 280 to 305 mesh monofilament and a sharp squeegee.

SCREEN COATING, FILM, BLOCKOUT: Direct and indirect photostencils, or water soluble, knife-cut stencils are suitable.

MODIFIERS: May be used straight from the can, but 5-15% thinning with CRP-1800 Thinner is recommended for optimum printing characteristics and leveling. CRP-1370 Extender should be used when conditions require greater transparency or color brilliance. Use CRP-1700 as a metallic base.

RETARDER: To improve screen stability, or under hot shop conditions, use some or all Slow Thinner CRP-1802.

DIE DUTTING / CREASING: Can be die cut, test before production.

WASHUP: Use CRP-1840 Washup or biodegradable wash 2500 or 2510 screen wash gel.

ALWAYS TEST PRINT BEFORE PRODUCTION!

63 results

 
Color Number Prod Type Color Name
it-0900 CRP-0900 CRP Series Corrugated Plastic Ink Flourescent Magenta
it-0910 CRP-0910 CRP Series Corrugated Plastic Ink Flourescent Orange/Red
it-0920 CRP-0920 CRP Series Corrugated Plastic Ink Flourescent Green
it-0930 CRP-0930 CRP Series Corrugated Plastic Ink Flourescent Cerise
it-0940 CRP-0940 CRP Series Corrugated Plastic Ink Flourescent Chartreuse
it-0950 CRP-0950 CRP Series Corrugated Plastic Ink Flourescent Red
it-0970 CRP-0970 CRP Series Corrugated Plastic Ink Flourescent Pink
it-0980 CRP-0980 CRP Series Corrugated Plastic Ink Flourescent Orange
it-0990 CRP-0990 CRP Series Corrugated Plastic Ink Flourescent Blue
it-1010 CRP-1011 CRP Series Corrugated Plastic Ink Red #032
it-1020 CRP-1020 CRP Series Corrugated Plastic Ink Fire Red
it-1030 CRP-1030 CRP Series Corrugated Plastic Ink Brilliant Red
it-1040 CRP-1040 CRP Series Corrugated Plastic Ink Bright Red
it-1050 CRP-1050 CRP Series Corrugated Plastic Ink Permanent Red
it-1060 CRP-1060 CRP Series Corrugated Plastic Ink Red #185
it-1080 CRP-1080 CRP Series Corrugated Plastic Ink Maroon
it-1090 CRP-1090 CRP Series Corrugated Plastic Ink Transparent Red
it-1110 CRP-1110 CRP Series Corrugated Plastic Ink Black
pmswhite CRP-1120 CRP Series Corrugated Plastic Ink White
it-1130 CRP-1130 CRP Series Corrugated Plastic Ink Process Black
it-1140 CRP-1140 CRP Series Corrugated Plastic Ink Brown
it-1220 CRP-1220 CRP Series Corrugated Plastic Ink Orange
it-1240 CRP-1240 CRP Series Corrugated Plastic Ink Vermilion
it-1250 CRP-1250 CRP Series Corrugated Plastic Ink Warm Red
it-1300 CRP-1300 CRP Series Corrugated Plastic Ink Primrose Yellow
Color Number Prod Type Color Name