Phosphorescent plastisol is a glow-in-the-dark ink which is supplied ready to use. This ink is formulated for application to cotton and cotton/polyester garments and novelty items. Best results are obtained printed directly onto a white garment or when printed over a white underbase.
In daylight or artificial light conditions, this ink will have a pale green hue but will glow an eerie green color in darkness. Colors can be obtained by adding small amounts (up to 10%) of Lancer's Florescent Inks.
USES: 700 Series Phosphorescent Inks are for use on white cotton or cotton/polyester blends.
OPACITY:Medium opacity on white shirts. Not recommended for dark fabrics without a white under base.
DRYING TIME:700 Series plastisol inks will not air dry. They must be heat cured. 700 Series inks will fully cure and withstand repeated washings when the entire ink deposit reaches 310°F.
SCREEN FABRIC: For Glow-in-the-Dark, use 80-160/inch mesh.
SCREEN COATING, FILM, BLOCKOUT: All types of stencils may be used for screen printing 700 Series Plastisol Inks
MODIFIERS:To reduce the viscosity of the ink, slight amounts of 502Reducer may be added to the plastisol ink (up to 5%).
WASHUP: Use SYS-1925 or biodegradable washup SYS-2500, SYS-2550 or SYS-2510 screen wash gel.
ALWAYS TEST PRINT BEFORE PRODUCTION!