PRINTING TIPS
Stir inks before printing
Use consistent, high-tensions screen mesh to optimize performance properties
2542 ImageBrite Reflective Lite Gray is a clear reflective ink pre-tint to a light gray color.
For best reflective properties, print ImageBrite direct to open weave fabrics. Direct printing allows the ink to sink into the fabric leaving the reflective media on top for a brilliant reflectivity.
ImageBrite Reflectives are not recommended on tightly woven fabrics such as nylon or printed over an underbase as this will diminish the reflectivity properties.
Proper ink deposit is critical to achieve the best reflectivity results. Recommended using single print with single or double stroke and proper mesh counts. Pre-test suitability for reflectivity, opacity and durability before production.
ImageBrite Reflective inks work well on dark fabrics but are not highly saturated. The color under normal lighting will vary with the fabric color.
It is recommended to outline images with a white or contrasting
For best care, hand wash or machine wash on cold cycle with garment inside-out. Label garments with suggested wash instructions.
RECOMMENDED PARAMETERS
Flash Temperature - 220° F (105° C)
Cure Temperature - 320° F (160° C)
Squeegee Durometer - 70/90/70, 70
Squeegee Blade - Sharp, Square
Squeegee Angle - 10-15%
Squeegee Speed - Medium flood, Medium stroke
Mesh Count - 110-160 t/in (43-62 t/cm)
Stencil - 2 over 2, Off Contact: 1/16in, Emulsion over mesh: 15-20%
Substrate Type - cotton, blends, some synthetics
Additives - K2915 Curable Reducer - 5% max
Storage - 65° F to 90° F (18° C to 32° C). Avoid direct sun. Use within one year of receipt
Cleanup - Dispose unused ink responsibly. Standard plastisol cleaners, press wash, or ink degradant
ALWAYS TEST PRINT BEFORE PRODUCTION!
