Opaque Pantone Warm Red

SPECIFICATIONS:

USES:Series 7100Õs adhesion to treated Polyethylene, Polypropylene, PVC, PET , and many other packaging substrates is excellent.

FINISH:Cures to a gloss finish; however a matte version is available on special order.

SPECIFICATIONS:

monofilament polyester mesh, Series 7100 will yield an

USES:Series 7100Õs adhesion to treated Polyethylene, Polypropylene, PVC, PET , and many other packaging substrates is excellent.

OPACITY:Good opacity on most

FINISH:Cures to a gloss finish; however a matte version is available on special order.

been formulated for fast curing to maximize production

COVERAGE:Using 390 monofilament polyester mesh, Series 7100 will yield an average of 3200 square feet per gallon. Recommended ink film thickness is 0.4 to 0.6 mil (10-15 microns).

OPACITY:Good opacity on most substrates.

Acceptable 305-420 mesh per inch. (Open area should not

CURING: Series 7100 has been formulated for fast curing to maximize production speeds. Focused mercury vapor arcs and microwave lamps with a window of 200-225 millijoules will provide an optimal cure. Printing speeds of 70-100 bottles per minute can be expected.

MODIFIERS:To lower the

SCREEN FABRIC:Monofilament polyester or nylon, 350-390 mesh per inch is recommended. Acceptable 305-420 mesh per inch. (Open area should not exceed 30%).

add Anti-Bubble #1 or #2.

SCREEN COATING, FILM, BLOCKOUT: Direct and indirect photostencils, or water soluble, knife-cut stencils are suitable.

adhesion to substrate.

MODIFIERS:To lower the viscosity which will enhance the transfer of the ink through the screen, use Thinner #1 (Diluent) OR #2. To increase curing speeds add Activator #7 (Sensitizer). To eliminate bubbles resulting from the screening process, add Anti-Bubble #1 or #2. To eliminate Òfish eyesÓ in the wet ink film add Flow Promoter. Use 71-100 Mixing Base as an extender to enhance cure and adhesion to substrate. Use 71-400 H/T Mixing Base as an extender to reduce color strength of Process colors and to increase the viscosity of standard colors for fine line copy. Thickening Powder (KC-8212) can be used when color strength can not be altered. Flattening Powder (KC-8211) is available to reduce gloss

SQUEEGEE:An 80 durometer (Shore A Hardness) polyurethane is recommended. It should be well sharpened.

and protective clothing is recommended. Avoid prolonged

SPECIAL NOTES:All UV inks and coatings are sensitive to contamination. Use only new screens or those previously used for UV printing. Do not add any conventional ink or solvents to the inks. They are most likely not compatible and will destroy all properties.

physician. Like most polymers, the properly Ðcured resins

WARNING: The use of goggles, gloves, and protective clothing is recommended. Avoid prolonged breathing of vapors. Contact of liquid material with the skin may be irritating; wash exposed area thoroughly with soap and water. Contact of liquid with the eyes may cause injury Ð effects may be delayed; flush eyes with large amounts of water for 15 minutes and call a physician. Like most polymers, the properly Ðcured resins are considered largely inert.

WASHUP: SYS-1925 or

aw