|
|
||
|
|
|
|
| Qty | Break |
|---|---|
| 1 | $ 138.55 |
| 4 | $ 131.62 |
| 8 | $ 124.70 |
| 12 | $ 117.77 |
| 20 | $ 110.84 |
USES: Flexible pressure sensitive vinyls: Cast and calendered outdoor films such as Scotchcal, Avery, Meyercord, General Formulations. Rigid sheet vinyl and foamed vinyl graphics panels: Sintra, Trovicel, Celtec, Vekaplan. Also recommended for Lexan, Makrofol and other polycarbonates, some acrylics, and other substrates with vinyl coatings.
FINISH: Dries to a flexible, flat finish.
COVERAGE: Averages about 1200 sq. ft. per gallon.
OPACITY: Excellent opacity for most colors.
DRYING TIME: Air-dries in approximately 15-45 minutes; forced drying time is 30 to 60 seconds at 100-120°F. Low lifts are recommended.
SCREEN FABRIC: Use a 160-300+ mesh for conventional printing.
SCREEN COATING, FILM, BLOCKOUT: Direct and indirect photostencils, or water soluble, knife-cut stencils are suitable.
MODIFIERS: Thin with VC-101 or SYS-1920. To improve ink flow out use SGV-11335. Under hot and dry conditions, us VC-120 Retarder sparingly.
ADHESION: Excellent on most vinyls.
WASHUP: Use VC-110, or SYS-1911 Vinyl Washup or biodegradable washes 2500 or 2510 screen wash gel.
ALWAYS TEST PRINT BEFORE PRODUCTION!Item ID: VC 115 G
Manufacturer: GAL - CANDOC FLAT VINYL IRON OXIDE
Model No:
