|
|
||
|
|
|
|
USES: For use on cottons, cotton/polyester blends, can be used on both hot and cold peel transfers.
FINISH: Cures to a soft-hand finish.
OPACITY: Medium opacity on white shirts. Not recommended for dark fabrics without a white under base.
DRYING TIME:PLUE Series plastisol inks will not air dry. They must be heat cured. PLUE Series inks will fully cure and withstand repeated washings when the entire ink deposit reaches 300°F. Curing can be accomplished with the use of a conveyor dryer, flash curing unit, or simple infrared heater. Will semi-cure or gel at 250°F for transfers.
SCREEN FABRIC: Use 83-110 monofilament polyester depending on the substrate.
SCREEN COATING, FILM, BLOCKOUT: Use water soluble hand-cut, photo screens and blockouts with this ink or use other suitable products.
MODIFIERS:Use UPLRE-9000 as a reducer or detackifier. For fluorescent powders use UPLUE-9030.
WASHUP: T-125 mineral spirits, or biodegradable washes SYS-2500, SYS-2550 or SYS-2510 screen wash gel.
ALWAYS TEST PRINT BEFORE PRODUCTION!Item ID: UPLUE F666 5G
Manufacturer: 5GAL - ULTRA SOFT PHOSPHORESCENT GREEN
Model No:
