ULON-2027 Unilon Powder for Nylon, Polyester, and Cap Transfers
SPECIFICATIONS:
Unilon-2027 for Nylon, Polyester and Cap Transfers
After printing the plastisol (Union's Ultrasoft is the preferred ink) on heat transfer paper, apply Unilon-2027 as follows:
Fill a rectangular tray with approximately 1/4" of Unilon-2027 Powder.
Pass the transfer through the tray, print side up. Unilon will adhere to wet or semi-cured plastisol.
Remove powder from the unprinted areas by vigorously shaking the transfer or gently blowing cool air across it. Light brushing with a soft brush (taking care not to smude the print), may also be used.
Semi-cure or gel the ink as described on the Ultrasoft Technical Data Sheet.
Transfer on a heat transfer press at temperatures compatible with the garment.
If printing a multi-color transfer, the powder can be applied after all the colors are printed (it will stick well to the last wet color and fair to the cured colors) or after every color and cure in between just as you would for a regular heat transfer. ALWAYS TEST PRINT BEFORE PRODUCTION!
LB - TRANSFER POWDER ADHSIVE(NYLON) ULON 2027
Item ID: ULON 2027
Manufacturer: LB - TRANSFER POWDER ADHSIVE(NYLON)
Model No:
Improves the transfer of fine details.
Improves adhesion of baseball cap transfers .
Improves adhesion of foil transfers .
Essential for puff transfers .
Easy to use
ULON-2027 Unilon Powder for Nylon, Polyester, and Cap Transfers. Melts at 248 - 260°F
ULON-2159 Unilon Powder for Foil Transfers. Melts at 176 - 185°F
ULON-2170 Unilon Powder for Puff Transfers. Melts at 176 - 185°F
