|
|
||
|
|
|
|
| Qty | Break |
|---|---|
| 1 | $ 221.10 |
| 4 | $ 210.05 |
| 8 | $ 198.99 |
| 12 | $ 187.94 |
| 20 | $ 176.88 |
USES: For use on metals, ceramic tiles, glass, phenolics, rigid plastics, and polyethylene.
FINISH: Dries to a high gloss finish.
COVERAGE: Averages about 1,000 sq. ft. per gallon.
OPACITY: Excellent opacity; transparent colors are also available.
DRYING TIME: Approximately 30 to 60 minutes at room temperature. This series can be forced dried 3 to 5 minutes at a minimum of 150 to 180°F. For best chemical resistance bake for 7 minutes at 350 to 370 °F
MIXING INSTRUCTIONS: PP-91-999 Catalyst is required with PP-91 Series ink and must be ordered separately. An 8 oz. container of catalyst is normally used with a quart of ink, and a quart container of catalyst is normally used with a gallon of ink. Add 1 part Catalyst to 4 parts ink. Catalyst pot life is normally 4-6 hours; shorter at elevated temperature. Baking will produce hard, unscratchable prints. For Metallic colors use PP-91-999A Curing Agent.
SCREEN FABRIC: Use a 200-305 monofilament fabric.
SCREEN COATING, FILM, BLOCKOUT: Direct and indirect photostencils, or water soluble, knife-cut stencils are suitable.
MODIFIERS: Use SYS-1976 for fast thinner or PP-91-805 for reduction. To extend add PP-91-825. To subdue the gloss finish mix PT-83 Flattening Powder. Under hot and dry conditions, use T-980 or PP-91-810 to retard drying.
ADHESION: Excellent on most substrates.
WASHUP: Use SYS-1925 Washup or biodegradable washes 2500 or 2510 screen wash gel.
ALWAYS TEST PRINT BEFORE PRODUCTION!Item ID: PP 91 502 G
Manufacturer: GAL - 2 PART EPOXY WHITE
Model No:
