QT - POLY ENAMEL BROWN

An extremely fast drying enamel for a wide variety of substrates including treated polyethylene and polypropylene

SPECIFICATIONS:

USES: For use on card, paper, metal, wood, pre-treated polyethylene and polypropylene.

FINISH: Dries to a high gloss finish.

COVERAGE: Averages about 2,100 sq. ft. per gallon using 230 mesh monofilament.

OPACITY: Good opacity for most colors.

DRYING TIME: POE Series dries by evaporation and subsequent curing. Prints normally air-dry within 20 to 30 minutes, or 30 to 60 seconds at 160 to 180°F. Allow more time when overprinting to avoid possible re-wetting of previous colors.

SCREEN FABRIC: Use a 230 to 305 monofilament mesh.

SCREEN COATING, FILM, BLOCKOUT: Direct and indirect photostencils, or water soluble, knife-cut stencils are suitable.

MODIFIERS: May be used straight from the can, but thinning (5-10% ) with POE-1800 Thinner may improve print quality. POE-1700 Clear should be used when conditions require greater transparency or color brilliance. Use POE-1700 as a metallic base.

ADHESION: Excellent on most substrates, and exhibits excellent resistance to a wide variety of consumer chemicals..

WASHUP: Use POE-1840, T-900, SYS-1925, or biodegradable washes 2500 or 2510 screen wash gel.