5GAL - MATSUI ACRYLICON WHITE

Acrylicon White is a direct print and mixing white for "Performance" and high stretch fabrics that can be mixed with "Neo Pigments" to achieve an extremely soft hand feel and excellent elasticity. Yielding a soft and "silicon-like" finish with zero tack.

APPLICAITONS

Print through fine screen mesh up to 160 mc in (63 mc cm) when cured at 320°F (160°C), Acrylicon White produces the soft and unique hand feel.

SPECIAL RECOMMENDATIONS

Acrylicon White should be mixed in clean vessels using clean mixing blades and utensils. Any contamination from other ink sources or non-approved additives could make Acrylicon White test positive for restricted PVC's.

Stretch White 301 can be dry cleaned or ironed
Use Retarder MG 1-5% to help with open time in the screen
Use Fixer WF-N 1-5% to help with wash fastness
Use Softener MG 1-4% to help penetrate in to the garment
Use Thickener B .25-1% to help thicken the ink
Use RV Additive 1-3% to reduce viscosity

FEATURES

Wet Ink Tack - Low
After Flash Tack - Low
Printability - Excellent
Surface Appearance - Matte
Opacity/Viscosity - Excellent/Low
Bleed Resistance - None
Flash Temperature - 160° F (71° C)/decreases with deposit thickness
Cure Temperature - 320° F (160° C)
Squeegee Hardness - Medium
Squeegee Blade - Sharp
Squeegee Angle - 45 degrees to screen
Squeegee Speed - Medium
Underlay - Excellent
Emulsion - Direct or Indirect
Mesh Count - 86-160 mc in (34-63 mc cm)
Thinner - RV Additive
Thickener - Thickener B
Storage - 65° F to 95° F (18° C to 35° C). Avoid direct sun.
Cleanup - Water and mild soap or detergent
Color Range - White
Substrate Type - Cotton
Substrate Color(s) - Light, Medium, and Dark Fabrics.