|
|
||
|
|
|
|
| Qty | Break |
|---|---|
| 0 | $ 494.75 |
| 1 | $ 470.01 |
| 2 | $ 445.28 |
| 3 | $ 420.54 |
| 4 | $ 395.80 |
590 Sabre White is a completely phthalate free, low bleed plastisol specifically designed to prevent dye migration on cotton/poly blended fabrics including "hoodies". Sabre White's short body and cremy texture easily prints through meshes up to 230/in and provides excellent results when used as an under base, stand-alone or highlight white.
OPACITY: Excellent
CURING: Excalibur ink will cure when the entire thickness of the ink film reaches 320°F. (160°C) and held at this temperature for at least 15 seconds. Thicker deposits of Sabre White will require longer dwell times at this temperature.
GEL TEMPERATURE: Ink will surface gel at 240°F. (116°C).
HEAT TRANSFERS: May be used to produce cold peel transfers.
SCREEN FABRIC: For direct printing, 40-230/inch mesh may be used.
SQUEEGEE: Medium durometer (70) or triple durometer (70/90/70) is recommended.
SCREEN COATING, FILM, BLOCKOUT: All types of stencils may be used for screen printing Sabre White Ink.
MODIFIERS:To reduce the viscosity of the ink, slight amounts of 501 Curable Reducer may be added. Caution, adding too much reducer will reduce opacity and diminish bleed resistance.
WASHUP: Use SYS-1925 or biodegradable washup SYS-2500, SYS-2550 or SYS-2510 screen wash gel.
ALWAYS TEST PRINT BEFORE PRODUCTION!Item ID: L590 5G
Manufacturer: 5GAL - SABRE WHITE PF
Model No:
