QT - COLORPRO RED YS PMS MATCH SYS PF L551RYS Q

Features:

  • Prints have soft hand · Easy to print
  • Excellent color reproduction.
  • Ready to use or concentrate
  • For direct or transfer printing.

Price: $ 40.85 / QT



Product Overview


The ColorPRO system is precise, simple to use, and can be easily repeated - factors all important to today's screen printer. ColorPRO produces simulated Pantone® colors using 11 ink colors (including black and white). ColorPRO is a Pantone licensed system which means you will produce the most exact color. All of the colors have been mixed and test printed on T-shirt fabrics. ColorPRO has excellent opacity and is suitable for printing on lights and darks. Formulations are based on weight and are extremely easy to follow. Simply select a color from your Pantone Color Formula Guide and find the formula in the ColorPRO Mixing Guide. You need to mix only the quantity that the job requires.

SPECIFICATIONS:

USES: For use on cottons, cotton/polyester blends, can be used on cold peel transfers, and on nylon jackets (with Nylon Bonding Agent).

OPACITY: Excellent on all shirt colors.

DRYING TIME: Plastisol inks will not air dry. They must be heat cured. ColorPro inks will fully cure and withstand repeated washings when the entire ink deposit reaches 310°F. Curing can be accomplished with the use of a conveyor dryer, flash curing unit, or simple infrared heater. Will semi-cure or gel at 250°F for transfers.

TRANSFERS: Transfert 75 paper is recommended. For increased durability, use adhesive powder or print 841 or 842 adhesive over the entire transfer. Set transfer press for medium pressure for 10-15 seconds at 350° F. Peel cold. ColorPro is available in Lancer 951 Series for hot split transfers.

SCREEN FABRIC:Use 40-305 monofilament polyester depending on the substrate for direct prints, 80-125 mesh for transfers.

SCREEN COATING, FILM, BLOCKOUT: Use water-soluble, hand-cut photo screens and blockouts with this ink or use other suitable products.

MODIFIERS: Use small amounts of Lancer 502 reducer to achieve the look of a water based print. Any amount of 502 curable reducer can be used to reduce opacity and soften hand.

ADHESION: Excellent on most fabrics.

WASHUP: Use SYS-1925 or biodegradable washup SYS-2500, SYS-2550 or SYS-2510 screen wash gel.

ALWAYS TEST PRINT BEFORE PRODUCTION!

QT - COLORPRO RED YS PMS MATCH SYS PF L551RYS Q

Item ID: L551RYS Q

Manufacturer: QT - COLORPRO RED YS PMS MATCH SYS PF

Model No:

  • Prints have soft hand · Easy to print
  • Excellent color reproduction.
  • Ready to use or concentrate
  • For direct or transfer printing.