QT - GLOSS LACQUER WHITE

A general purpose, gloss-finish, nitrocellulose-based lacquer for hand or machine printing.

The GLL Series ink was formulated for indoor and medium-term outdoor exposure for a wide variety of substrates. The GLL Series has an extensive range of colors including four-color process and transparent colors. Formulated with a gloss finish this series air dries quickly.

SPECIFICATIONS:

USES: For use on nitrocellulose lacquer (pyroxilin)-coated stocks (fabric or paper), card, paper, some primed metal, cellulose-based plastics and coated foils.

FINISH: Dries to a gloss finish.

OPACITY: Good opacity for most colors.

COVERAGE: Averages about 2,100 sq. ft. per gallon using 280 meah polyester.

DRYING TIME: GLL Series dries by evaporation. Prints normally air-dry within 20 to 40 minutes, or 10 to 50 seconds on a jet dryer at 150°F to 200°F.

SCREEN FABRIC: Use a 200 or coarser mesh to achieve greatest opacity. Up to 305 mesh counts can be used for finer detail when necessary.

SCREEN COATING, FILM, BLOCKOUT: Direct and indirect photostencils, or water soluble, knife-cut stencils are suitable.

MODIFIERS: Direct and indirect photostencils, or water soluble, knife-cut stencils are suitable.

FLOW AGENT: GLL-1870.

RETARDER: To improve screen stability, or under hot shop conditions, use some or all Slow Thinner GLL-1820.

ADHESION: Excellent on most substrates.

WASHUP: Use GLL-1840, SYS-1925, or biodegradable washups 2500 or 2510 screen wash gel.