|
|
||
|
|
|
|
| Qty | Break |
|---|---|
| 1 | $ 149.00 |
| 4 | $ 141.55 |
| 8 | $ 134.10 |
| 12 | $ 126.65 |
| 20 | $ 119.20 |
PRINTING TIPS
Use consistent, high-tensioned screen mesh and sharp edges squeegees for best print results. Recommended mesh counts can vary depending on particle size.
For best HD results, use open mesh counts with 200-400 micron capillary film and print-flash-print. Use a heavy flood to fully fill the open areas of the stencil with ink then print with medium squeegee pressure.
Best results when printed directly onto the fabric.
Tintable with plastisol colorants. See Pigment Loading section for suggested starting tinting percentages. Reduce the amount of white colorant in the formula as specialty base will lighten the color.
Adjusting cure temperature and dwell time will yield a variety of textured effects.
Cure between 340-350° F (170-175° C) and increase dwell time to assure cure and to achieve desired cracking effect.
After the print is cooled, "crack by hand" by stretching the printed area for a custom distressed look.
RECOMMENDED PARAMETERS
Pigment Loading
Up to 10% with Wilflex PC
Up to 15% with Wilflex EQ
Up to 30% with Wilflex RIO / MX
Up to 15% with Rutland C3 Boosters
Fabric Type - 100% cotton, cotton blends, some synthetics
Mesh Count - 86-230 t/in (34-91 t/cm)
Mesh Tension - 25-35 n/cm2 Squeegee Durometer: - 60/90/60, 60-70
Squeegee Blade - Square, Sharp
Squeegee Stroke - Hard flood, Medium stroke
Squeegee Angle - 10-15%
Stencil - 2 over 2, Off Contact: 1/16" (.2cm), Emulsion over mesh: 15-20% or 200-400 micron Flash Temperature - 220° F (105° C)
Cure Temperature - 320° F (160° C)
Storage - 65° F - 90° F (18° C - 32° C). Avoid direct sun. Use within one year of receipt
Cleanup - Dispose unused ink responsibly. Standard plastisol cleaners, press wash, or ink degradent
Item ID: AV K2560 G
Manufacturer: GAL - K2560 INFINITE FX SUEDE BASE
Model No:
