|
|
||
|
|
|
|
| Qty | Break |
|---|---|
| 1 | $ 318.89 |
| 4 | $ 302.95 |
| 8 | $ 287.00 |
| 12 | $ 271.06 |
| 20 | $ 255.11 |
A fast-dry vinyl ink specifically formulated for high-speed printing on a wide variety of vinyl, polycarbonate, and some other plastic substrates. A top-quality product for soft, white vinyl 'decals' for fleet marking, equipment identification, etc.
USES: Suitable for most vinyl or vinyl-coated surfaces (including highly plasticized vinyl), polycarbonate coated polyester film and especially 'back-lit awning' substrates.
FINISH: Dries to a high-gloss finish.
OPACITY: Excellent opacity on opaque colors. Transparent colors are bright and clear.
COVERAGE: Approximately 2500 sq. ft. per gallon using a 280 monofilament fabric, and a sharp squeegee (i.e. machine printing).
DRYING TIME: AM Series dries by evaporation. Prints normally air dry within 10 minutes with good air circulation, or jet dry within 30 seconds at 120°F. Overprints require slightly longer drying time.
SCREEN FABRIC: All fabrics are suitable. We recommend a minimum of 160 mesh and a maximum of 380 mesh.
SCREEN COATING, FILM, BLOCKOUT: Direct and indirect photostencils, or water-soluble knife-cut films are suitable.
MODIFIERS: Ink may be used straight from can, but 10-20% thinning is recommended with AM-1800 thinner for optimum printing. For mixing metallic powders use AM-1700.
RETARDER: Under hot and dry conditions, use AM-1820 Slow Thinner or AM-1830 Extra Slow Thinner.
WASHUP: Screen cleans with SYS-1925 Lacquer Washup, VP-184 or biodegradable washes 2500 or 2510 screen wash gel.
ALWAYS TEST PRINT BEFORE PRODUCTION!Item ID: AM 1040 G
Manufacturer: GAL - MODIFIED ACR BRT RED/W HVY METAL
Model No:
