Features
• High Gloss on absorbent stock
• Non-blocking

Opaque Pantone Colors
KC-77-100 Mixing Base
KC-77-101 Yellow
KC-77-102 Warm Red
KC-77-103 Rubine Red
KC-77-104 Rhodamine Red
KC-77-105 Purple
KC-77-120 Violet
KC-77-106 Process Blue
KC-77-107 Reflex Blue
KC-77-108 Green
KC-77-109 Mixing White
KC-77-110 Mixing Black

Four-Color Process
KC-77-400 Halftone Base
KC-77-401 Yellow
KC-77-402 Magenta
KC-77-403 Cyan
KC-77-404 Black

Opaque Colors
KC-77-111 Opaque White
KC-77-112 Opaque Dense Black
KC-77-113 Primrose Yellow
KC-77-115 Medium Yellow
KC-77-114 Brilliant Orange
KC-77-116 Fire Red
KC-77-125 Bright Red
KC-77-117 Scarlet Red
KC-77-118 Navy Blue
KC-77-119 Peacock Blue
KC-77-120 Royal Violet
KC-77-121 Emerald Green
KC-77-122 Deep Green
KC-77-123 Lt. Brown
KC-77-124 Dk. Brown

Metallic Colors
KC-77-901 Silver
KC-77-903 Palegold
KC-77-904 Rich Palegold
KC-77-905 Richgold

Modifiers
KC-8201 Anti-Bubble #1
KC-8203 Diluent #1 (Flexible)
KC-8204 Diluent #2 (Same Flex)
KC-8205 Diluent #3 (Rigid)
KC-8206 Flow Promoter
KC-8207 Sensitizer #1
KC-8208 Sensitizer #3 Waterwhite
KC-8209 Sensitizer #7 Opaque
KC-8210 Adhesion Promoter

Biodegradable Wash-Up
SYS-2500 Screen Wash
SYS-2510 Screen Wash Gel

Packaging:
Inks: Quart, gallon, and 5-gallon pails
Solvents: Pints, quarts, and gallons

Developed to obtain a smooth gloss over uncoated and corrugated board substrates. This ink formulation will provide excellent adhesion to these stocks and will not block. Available in a wide range of finishes, from matte to satin to gloss.

SPECIFICATIONS:

USES: Uncoated and corrugated board substrates.

FINISH: Dries to a wide range of finishes, from matte to satin to gloss.

OPACITY: Good opacity on most substrates.

COVERAGE: Using 390 mesh, approximately 3200 square feet per gallon

SCREEN FABRIC: Monofilament polyester or nylon, 350-390 mesh per inch recommended. Acceptable 305-420 mesh per inch. (Open area should not exceed 30%)

FILM THICKNESS: Recommended 0.4 to 0.6 mil (10-15 microns)

SCREEN COATING, FILM, BLOCKOUT: Lacquer proof stencil, most direct or direct/indirect work well.

MODIFIERS: To lower viscosity use Diluent #1 or Diluent #3. To increase curing speed add Sensitizer #1, or Sensitizer #7. To eliminate any bubbles in the screen use Anti-bubble #1

WASHUP: Screen cleans with SYS-1925 or a special high flash point wash containing no hydrocarbon solvents such as biodegradable washes SYS-2500 or SYS-2510 Gel.

STORAGE/HANDLING/WARNINGS: See product data sheet.

ALWAYS TEST PRINT BEFORE PRODUCTION