Features
• Excellent adhesion to most metals
   including Stainless Steel
• Mar and chemical resistant
• Opaque or Transparent Pantone colors

Opaque Pantone Colors
KC-6100 Mixing Base
KC-6101 Yellow
KC-6102 Warm Red
KC-6103 Rubine Red
KC-6104 Rhodamine Red
KC-6105 Purple
KC-6120 Violet
KC-6106 Process Blue
KC-6107 Reflex Blue
KC-6108 Green
KC-6109 Mixing White
KC-6110 Mixing Black

Four-Color Process
KC-6400 Halftone Base
KC-6401 Yellow
KC-6402 Magenta
KC-6403 Cyan
KC-6404 Black

Opaque Colors
KC-6111 Opaque White
KC-6112 Opaque Dense Black
KC-6113 Primrose Yellow
KC-6115 Medium Yellow
KC-6114 Brilliant Orange
KC-6116 Fire Red
KC-6125 Bright Red
KC-6117 Scarlet Red
KC-6118 Navy Blue
KC-6119 Peacock Blue
KC-6120 Royal Violet
KC-6121 Emerald Green
KC-6122 Deep Green
KC-6123 Lt. Brown
KC-6124 Dk. Brown

Metallic Colors
KC-6901 Silver
KC-6903 Palegold
KC-6904 Rich Palegold
KC-6905 Richgold

Modifiers
KC-8201 Anti-Bubble #1
KC-8203 Diluent #1 (Flexible)
KC-8204 Diluent #2 (Same Flex)
KC-8205 Diluent #3 (Rigid)
KC-8206 Flow Promoter
KC-8207 Sensitizer #1
KC-8208 Sensitizer #3 Waterwhite
KC-8209 Sensitizer #7 Opaque
KC-8210 Adhesion Promoter

Biodegradable Wash-Up
SYS-2500 Screen Wash
SYS-2510 Screen Wash Gel

Packaging:
Inks: Quart, gallon, and 5-gallon pails
Solvents: Pints, quarts, and gallons

Designed to give excellent adhesion to stainless steel, uncoated aluminum and other metals. Metal-King is a single component, press-ready ink that offers exceptional mar and chemical resistance. All colors listed to the left are available in matte finish which must be specified when ordering. Ten fluorescent colors are also available.

SPECIFICATIONS:

USES: METAL KING ll Computer discs, metal nameplates, signs and glass decorating. Ideal for stainless steel and uncoated aluminum.

USES: METAL KING lll For superior adhesion to enamel, lacquer and powder coated metals. Excellent flexibility where embossing and bending is essential. Adhesion to other plastic, paper and vinyl substrates is good.

FINISH: Dries to a matte or gloss finish.

OPACITY: Good opacity on most substrates.

COVERAGE: Using 390 mesh, approx. 3200 square feet per gallon

DRYING TIME: Metal King inks cure in air upon brief exposure (2-5 seconds) to a focused high intensity ultraviolet light source standard 200 watt/inch medium pressure mercury vapor lamp. Speed of cure is approximately 60-80 fpm when passed through a conveyorized UV curing module containing 1x200 watt bulbs properly focused. Additional curing speeds can be achieved by adding 2-3% liquid sensitizer.

SCREEN FABRIC: Monofilament polyester or nylon, 350-390 mesh per inch recommended. Acceptable 305-420 mesh per inch. (Open area should not exceed 30%)

FILM THICKNESS: Recommended 0.4 to 0.6 mil (10-15 microns)

SCREEN COATING, FILM, BLOCKOUT: Lacquer proof stencil, most direct or direct/indirect work well.

MODIFIERS: To lower viscosity use Diluent #1 or Diluent #3. To increase curing speed add Sensitizer #1 or Sensitizer #7. To eliminate any bubbles in the screen use Anti-bubble #1.

WASHUP: Screen cleans with SYS-1925 or a special high flash point wash containing no hydrocarbon solvents such as biodegradable washes SYS-2500 or SYS-2510 Gel.

STORAGE/HANDLING/WARNINGS: See product data she

ALWAYS TEST PRINT BEFORE PRODUCTION