Features
• Four color process ink
• Extremely soft hand
• Minimal underscreen buildup
• Minimal dot gain
• Accurate colors
• Ready for use

PRPL Standard Colors
PRPL-1080 Fine White
PRPL-2080 Process Yellow
PRPL-3080 Process Cool Magenta
PRPL-3082 Process Magenta
PRPL-3085 Process Hot Magenta
PRPL-5080 Process Cyan
PRPL-8080 Process Black
PRPL-9080 Halftone Base
PRPL Triple Strength Colors
PRPL-1089 Fine White
PRPL-2089 Process Yellow
PRPL-3089 Process Magenta
PRPL-5089 Process Cyan
PRPL-8089 Process Black

Solvents
SYS-1125 Washup
PLUS-9000 Reducer

PLUM Colors
UPLUM-2080A Process Yellow
UPLUM-3070A Warm Red
UPLUM-3070B Perm. Warm Red
UPLUM-3080A Process Red
UPLUM-3090A Rubine Red
UPLUM-4060A Purple
UPLUM-5080A Process Blue
UPLUM-5090A Reflex Blue
UPLUM-6070A Green
UPLUM-8080A Process Black

Modifiers
UPLUM-9080A Halftone Process Base
UPLUM-9090 Extender Base

Biodegradable Wash-Up
SYS-2500 Screen Wash
SYS-2550 Low Odor Wash
SYS-2510 Screen Wash Gel

Packaging
Inks and solvents in quarts, gallons,
5-gallon pails and 55-gallon drums.

The PRPL and PLUM Series inks are a range of transparent colors formulated for direct printing on light colored garments. Both are transparent for ease of color matching. These mix-and-match color series inks exhibit most of the characteristics of standard plastisol inks and can be used with the same modifiers and additives.
Free Photoshop plug-in for PRPL inks in both PC and MAC format.

SPECIFICATIONS PRPL
This is a unique ink system that provides an extremely short, creamy, (highly thioxotropic) body which breaks down under the shear action of the squeegee. It will flow easily through meshes as high as 355 and recovers to resting viscosity immediately afterwards. Dots don’t spread and ink will not build up on the back of the screen. Each of the colors is highly transparent to provide clean halftones from highlight to deep shadow.
SPECIFICATIONS PLUM
This is a range of 10 transparent and universally accepted mixing colors that can be sued for in house matching in popular matching systems. PLUM colors should be used on light backgrounds. They are designed to be printed with 230 Mesh fabric for the truest color, but can be printed with 110 through 305T mesh.

USES: For use on light colored T-shirts, sweatshirts, jerseys, cotton and cotton/synthetic blends.

FINISH: Varies from gloss to satin, depending upon the textile being printed. Cures to a durable, soft-hand with outstanding washability and elasticity.

COVERAGE: Approximately 700 to 800 square feet per gallon when printing through 305 to 355 mesh.

DRYING TIME: Heat-cure at approximately 300 F to 325 F for 1 1/2 to 2 minutes. Will not air dry in the screen.

SCREEN COATING, FILM, BLOCKOUT: Use water soluble hand-cut, photo screens and blockouts with this ink or use other suitable products. Avoid water resistant or one pass photopolymer emulsions.

MODIFIERS: Use PRPL-9080 Halftone Base or UPLUM-9080 Halftone Base when printing fine detail.

WASHUP: Use T-125 or biodegradable SYS-2500 or SYS-2510 screen wash gel.

ALWAYS TEST PRINT BEFORE PRODUCTION