SPECIFICATIONS
USES: For
use on cottons, cotton/polyester blends, can be used on both hot
and cold peel transfers, and on nylon jackets (with the addition
of Nylobond Bonding Agent).
FINISH: Cures
to a soft-hand finish.
OPACITY: Excellent
opacity on light and medium colored shirts. Not recommended for
dark fabrics without a white under base.
DRYING TIME: PLUS
Series plastisol inks will not air dry. They must be heat cured.
PLUS Series inks will fully cure and withstand repeated washings
when the entire ink deposit reaches 300∞ F. Curing can be
accomplished with the use of a conveyor dryer, flash curing unit,
or simple infrared heater. Will semi-cure or gel at 250¾F for transfers.
SCREEN FABRIC: Use
86-305 monofilament polyester depending on the substrate.
SCREEN COATING, FILM, BLOCKOUT:
Use water soluble hand-cut, photo screens and blockouts with this
ink or use other suitable products.
MODIFIERS: Use
UPLUS-9090 Extender Base to extend colors and add strength. Use
UPLUS-9000 as a reducer or detackifier. For metallic and fluorescent
powders use UPLUS-9030.
ADHESION: Excellent
on 100% Cotton and blends.
WASHUP: T-125 mineral
spirits, or biodegradable washes
SYS-2500, SYS-2550 or SYS-2510 screen wash gel.
ALWAYS TEST PRINT BEFORE PRODUCTION
