A special range of twenty-five of the most Opaque Plastisol Colors available. Recommended for direct manual or machine printing (wet-on-wet or single color) on black and very dark colored garments. Soft, creamy consistency. While primarily used for direct printing on cotton and cotton/synthetic blends, it can be used for transfers if mixed with Extender Base PLUS-9090.

SPECIFICATIONS

USES: For use on cottons, cotton/polyester blends, can be used on both hot and cold peel transfers, and on nylon jackets (with the addition of Nylobond Bonding Agent).

FINISH: Cures to a soft-hand finish.

OPACITY: Excellent opacity on light and medium colored shirts. Not recommended for dark fabrics without a white under base.

DRYING TIME: PLUS Series plastisol inks will not air dry. They must be heat cured. PLUS Series inks will fully cure and withstand repeated washings when the entire ink deposit reaches 300 F. Curing can be accomplished with the use of a conveyor dryer, flash curing unit, or simple infrared heater. Will semi-cure or gel at 250 F for transfers.

SCREEN FABRIC: Use 86-305 monofilament polyester depending on the substrate.

SCREEN COATING, FILM, BLOCKOUT: Use water soluble hand-cut, photo screens and blockouts with this ink or use other suitable products.

MODIFIERS: Use UPLUS-9090 Extender Base to extend colors and add strength. Use UPLUS-9000 as a reducer or detackifier. For metallic and fluorescent powders use UPLUS-9030.

ADHESION: Excellent on 100% Cotton and blends.

WASHUP: T-125 mineral spirits, or biodegradable washes
SYS-2500, SYS-2550 or SYS-2510 screen wash gel.

ALWAYS TEST PRINT BEFORE PRODUCTION