SPECIFICATIONS
USES: For use on
T-shirts, sweatshirts, jerseys, denim, banners and pennants. For
cotton/polyester blends where bleeding may occur, use UPAFC-1050
Fast Flash Low Bleed White or UPADM-1057 Premium Low Bleed White
as a first down base.
OPACITY: Excellent
of all shirt colors.
COVERAGE: Approximately
550 to 650 square feet per gallon.
DRYING TIME: Inks
will fully cure when entire ink layer reaches 300 F. Mixopaque
will not air-dry in the screen.
SCREEN FABRIC: For
dark 100% cotton use 60-175T monofilament. Colors are designed
to reproduce specific color at 60T monofilament on black without
underlay. For dark cotton/polyester blends use 86-175T monofilament.
For cotton/polyester blends where bleeding may occur, use UPAFC-1050
Fast Flash Low Bleed White or UPADM-1057 Premium Low Bleed White
as a first down base. For white or light-colored fabrics use up
to 230T monofilament.
SCREEN COATING, FILM, BLOCKOUT: Use
water-soluble, hand-cut photo screens and blockouts with this ink
or use other suitable products.
MODIFIERS: Use
MIXO-9070 to reduce opacity or soften the hand of the ink. Can
be mixed 10-50% by weight depending on the color of the fabric
and the desired opacity or softness of the finished print.
REDUCER: Use
UPLUS-9000 sparingly (2% or less).
ADHESION: Excellent
for most fabrics.
WASHUP: Use
T-125 or biodegradable washup SYS-2500, SYS-2550 or
SYS-2510 screen wash gel.
Free Mixopaque PC and Macintosh formulation software is available.
ALWAYS TEST PRINT BEFORE PRODUCTION
