| Features
• Four color process ink
• Extremely soft hand
• Minimal underscreen buildup
• Minimal dot gain
• Accurate colors
• Ready for use
600 Series Colors
L600PY Process Yellow
L600PM Process Magenta
L600PR Process Red
L600PB Process Blue
L600PC Process Cyan
L600PBK Process Black
600 Super Strength Series Colors
L600SSPY Process Yellow
L600SSPM Process Magenta
L600SSPR Process Red
L600SSPB Process Blue
L600SSPC Process Cyan
L600SSPBK Process Black
Modifiers
L505 Process
Base
Biodegradable Wash-Up
SYS-2500 Screen Wash
SYS-2550 Low Odor Wash
SYS-2510 Screen Wash Gel
Packaging
Inks and solvents in quarts, gallons,
5-gallon pails and 55-gallon drums.
|
| TopForm |
| |
|
 |
|
| Lancer 600 Series |
| PROCESS AND MATCHING |
| |
| A range of process colors available in regular and
super strength versions. Provides brilliant process color prints
for almost any design. Can be printed with up to 305T mesh. |
|
USES: For
use on light colored T-shirts, sweatshirts, jerseys, cotton and cotton/synthetic
blends.
FINISH: Varies
from gloss to satin, depending upon the textile being printed. Cures
to a durable, soft-hand with outstanding washability and elasticity.
COVERAGE: Approximately 700 to
800 square feet per gallon when printing through 305 to 355 mesh.
DRYING TIME: Heat-cure
at approximately 300∞ F to 325∞ F for 1 1/2 to 2 minutes.
Will not air dry in the screen.
SCREEN COATING, FILM, BLOCKOUT: Use
water soluble hand-cut, photo screens and blockouts with this ink or
use other suitable products. Avoid water resistant or one pass photopolymer
emulsions.
MODIFIERS: Use
PRPL-9080 Halftone Base or UPLUM-9080 Halftone Base when printing fine
detail.
WASHUP: Use
T-125 or biodegradable SYS-2500 or SYS-2510 screen wash gel.
ALWAYS TEST PRINT BEFORE PRODUCTION
|
|
