Features
•
Prints have soft hand • Easy to print
•
56 Standard colors • Ready to use
• For direct or transfer printing
Opaque Colors
L500AQ Aqua
L500BK Black
L500BO Bright Orange
L500BR Bright Royal
L500BS Bright Scarlet
L500CAR Cardinal Red
L500CR Candy Red
L500CRM Crimson
L500DB Dark Brown
L500DG Dallas Green
L500EP Egg Plant
L500FG Forest Green
L500FL Flesh
L500JA Jade
L500KG Kelly Green
L500LB Light Blue
L500LG Light Gold
L500LP Light Purple
L500LR Light Royal
L500LTB Light Brown
L500LY Lemon Yellow
L500MA Maroon
L500NB Navy Blue
L500OG Old Gold
L500OR Orange
L500PU Purple
L500RB Royal Blue
L500REB Reflex Blue
L500RH Rhodamine Red
L500RU Rubine Red
L500SC Scarlet
L500SG Silver Grey
L500STG Steel Grey
L500TB True Blue
L500TE Teal
L500TU Turquoise
L500VI Violet
L500WR Warm Red
Modifiers
L501 Curable Reducer
L502 Viscosity Reducer
L504 Clear Base
L505 Process Base
Biodegradable Wash-Up
SYS-2500 Screen Wash
SYS-2550 Low Odor Wash
SYS-2510 Screen Wash Gel
Packaging
Inks and Solvents in quarts, gallons and 5-gallon pails.
|
| Top of page |
| |
|
 |
|
| Lancer
500 Series |
| DIRECT PRINT PLASTISOL INK |
| FOR
DIRECT PRINTING OR COLD PEEL TRANSFERS |
| Highly versatile, lead-free type plastisol inks formulated
for heat transfer and wet-on-wet direct printing with great opacity
and direct prints with a soft hand finish. Ideal for high speed automatic
presses. 500 Series inks are formulated to minimize build up. Available
in a wide variety of popular colors including fluorescents. |
|
SPECIFICATIONS:
USES: For use on cottons, cotton/polyester
blends, can be used on cold peel transfers, and on nylon jackets
(with Nylon Bonding Agent).
FINISH: Cures
to a soft-hand finish.
OPACITY: Excellent
opacity.
DRYING TIME: 500
Series plastisol inks will not air dry. They must be heat cured.
500 Series inks will fully cure and withstand repeated
washings when the entire ink deposit reaches 320º F. Curing
can be accomplished with the use of a conveyor dryer, flash curing
unit, or simple infrared heater. Will semi-cure or gel at 250¾F
for transfers.
TRANSFERS: Transfert
75 paper is recommended. For increased durability, use adhesive
powder or print 841 or 842 adhesive over the entire
transfer. Set transfer press for medium pressure for 10-15 seconds
at 350º F. Peel cold.
SCREEN FABRIC: Use
40-305 monofilament polyester depending on the substrate for
direct prints, 80-125 mesh for transfers.
SCREEN COATING, FILM,
BLOCKOUT: Use water soluble hand-cut, photo
screens and blockouts with this ink or use other suitable products.
MODIFIERS: Use small amounts of 502 reducer to achieve the look of
a water based print. Any amount of 502 curable reducer can be used
to reduce opacity and soften hand.
WASHUP: T-125
mineral spirits, or biodegradable washes SYS-2500, SYS-2550
or SYS-2510 screen wash gel.
ALWAYS
TEST PRINT BEFORE PRODUCTION!
|
|
