Formulated to provide matte finish opaque prints with high deposits and excellent opacity. Recommended for printing large numbers, letters, and designs on cotton and cotton/poly athletic garments as well as nylon mesh jerseys. Also, for many of the new
stretch fabrics used in active wear (bathing suits, cycling suits, dance wear, etc.) such as Lycra, Spandex, etc. where great elasticity and toughness is required.High Opacity Colors

SPECIFICATIONS:

OPACITY: Excellent opacity.

FINISH: Cures to a soft-hand finish.

USES:For use on cottons, cotton/polyester blends, can be used on cold peel transfers, and on Spandex and Lycra.

SCREEN FABRIC: Use 60 to 110 monofilament polyester depending on material being printed. For best results the mesh should be tensioned to at least 24 newtons.

SCREEN COATING, FILM, BLOCKOUT: Use water soluble handcut, photo screens and blockouts with this ink or use other suitable products.

DRYING TIME: Plastisol inks will not air dry. They must be heat cured. SportPro inks will fully cure and withstand repeated washings when the entire ink deposit reaches from 290 to 310°F. Curing can be accomplished with the use of a conveyor dryer, flash curing unit, or simple infrared heater. Will semi-cure or gel at 250°F for transfers.

MODIFIERS: Any amount of 1501 curable reducer can be used to reduce opacity and soften hand.

WASHUP: T-125mineral spirits, or biodegradable washes
SYS-2500, SYS-2550or SYS-2510screen wash gel. SYS-2550 Low Odor Wash

ALWAYS TEST PRINT BEFORE PRODUCTION