| Features
•
Prints have soft hand
• Easy to print
• Excellent color reproduction
• Ready to use or concentrate
• For direct or transfer printing
ColorPro Colors - Direct Print
L551BK Black
L551BGS Blue (GS)
L551BRS Blue (RS)
L551GR Green
L551MA Magenta
L551RBS Red (BS)
L551RYS Red (YS)
L551VI Violet
L551YGS Yellow (GS)
L551YRS Yellow (RS)
L551WH White
L551 Mixing Base
ColorPro Colors - Transfers
L951BK Black
L951BGS Blue (GS)
L951BRS Blue (RS)
L951GR Green
L951MA Magenta
L951RBS Red (BS)
L951RYS Red (YS)
L951VI Violet
L951YGS Yellow (GS)
L951YRS Yellow (RS)
L951WH White
PCPro Colors - Concentrates
L PCPBK Black
L PCPBGS Blue (GS)
L PCPBRS Blue (RS)
L PCPGR Green
L PCPMA Magenta
L PCPRBS Red (BS)
L PCPRYS Red (YS)
L PCPVI Violet
L PCPYGS Yellow (GS)
L PCPYRS Yellow (RS)
L PCPWH White
L PCPFLG Fluorescent Green
L PCPFLO Fluorescent Orange
L PCPFLR Fluorescent Red
L PCPFLY Fluorescent Yellow
L PCPFLB Fluorescent Blue
L PCPFLM Fluorescent Magenta
L PCPFLP Fluorescent Pink
L PCPFLV Fluorescent Violet
Bases For Concentrates
L505 Direct
Print Base
L550 High
Opacity Base
L400 High
Stretch Base
L905 Hot
Split Transfer Base
L950 Opaque
Hot Split Base
L820 Puff
Base
L835 High
Density Base
L825 Foam
Grip Base
Biodegradable Wash-Up
SYS-2500 Screen Wash
SYS-2550 Low Odor Wash
SYS-2510 Screen Wash Gel
Packaging:
Inks and Solvents in quarts, gallons and 5-gallon pails. |
| Top of page |
| |
|
 |
|
| ColorPro
Series |
| PLASTISOL MATCHING SYSTEM |
| READY-FOR-USE AND
CONCENTRATES |
| ColorPro produces simulated Pantone® colors using
11 standard ink colors including black & white. ColorPro is suitable
for light and dark fabrics. Formulations are based on weight and
are extremely easy to use. PCPro uses concentrates and base to achieve
the same results. Because Lancer manufactures their own pigment,
Lancer concentrates are more uniform from batch to batch than others. |
|
SPECIFICATIONS
USES: For use on cottons, cotton/polyester blends, can be used on
cold peel transfers, and on nylon jackets (with Nylon Bonding Agent).
FINISH: Cures to a soft-hand finish.
OPACITY: Excellent opacity.
DRYING TIME: Plastisol inks will not air dry. They must be heat cured.
ColorPro inks will fully cure and withstand repeated washings when
the entire ink deposit reaches 310∞F. Curing can be accomplished
with the use of a conveyor dryer, flash curing unit, or simple infrared
heater. Will semi-cure or gel at 250¾F for transfers.
TRANSFERS: Transfert 75 paper is recommended. For increased durability,
use adhesive powder or print 841 or 842 adhesive over the entire
transfer. Set transfer press for medium pressure for 10-15 seconds
at 350∞ F. Peel cold. ColorPro is available in 951 Series for
hot split transfers.
SCREEN FABRIC: Use 40-305 monofilament polyester depending on the
substrate for direct prints, 80-125 mesh for transfers.
SCREEN COATING, FILM, BLOCKOUT: Use water soluble hand-cut, photo
screens and blockouts with this ink or use other suitable products
.
MODIFIERS: Use small amounts of 502 reducer to achieve the look of
a water based print. Any amount of 502 curable reducer can be used
to reduce opacity and soften hand.
WASHUP: T-125 mineral spirits, or biodegradable washes
SYS-2500, SYS-2550 or SYS-2510 screen wash gel.
ALWAYS TEST PRINT BEFORE PRODUCTION
|
|
