Nylon Transfer Powder
Permanent adhesion of plastisol heat transfers
ULON-2027 multi-purpose Transfer Adherent Powder provides permanent adhesion to nylon, polyester and other synthetics. These powders are simply sprinkled on the transfer after printing. Once fused, the treated transfer can be applied to the fabric or garment; positive bonding results. ULON-2027 will not cause discoloration or shrinkage. Transfer remains permanently bonded under normal washing and drying conditions. Sold by the pound
ULON-2027 Union Transfer Powder

NYLO BOND
Strengthens adhesion of Plastisol inks to nylon
Nylon bonding agents are additives which, when mixed with plastisol colors, provide adhesion to water proofed nylon jackets and other garments. Simply add 10-15% to the plastisol (by weight). To obtain a 10% addition, the following is recommended:
To one quart white, add 6 oz Bonding Agent
To one quart color, add 4 oz. Bonding Agent
For more effective bonding on more highly water-proofed garments, use 15%:
To one quart white, add 9 oz. Bonding Agent
To one quart color, add 6 oz. Bonding Agent
Less than 10% may prevent adhesion or abrasion resistance. More than 15% Nylobond may diminish opacity and shorten shelf life. Working life for 10% mixture is 8 to 16 hours. A 15% mixture is 6 to 8 hours.
*Always test on actual substrate before printing.
UNYBD-9120-4 Nylobond 4 oz.
UNYBD-9120-8 Nylobond 8 oz.
UNYBD-9120-P Nylobond Pint
UNYBD-9120-Q Nylobond Qt.

Soft Hand Base
Softens the feel of plastisol on the finished garment. Use 20-25% by weight. Available in quarts, gallons and 5 gallon drums.
UMIXO-9070 Soft Hand Base
UPADS-9095 Soft Hand Base

FOIL
Metallic Transfer Foils
Brilliant, high gloss metallic foils specially selected for application to T-Shirts and other textiles using a heat transfer press. Unifoil will adhere to most plastisols; however, adhesion, flexibility, abrasion resistance, and washability can be increased by the addition of Ulon Transfer Powder. 10 to 15% Ulon Powder mixed with the plastisol will increases Unifoil longevity. For application, cut foil to desired size and shape. Place it color side up on the area to be "foiled". Heat the transfer press to 325 to 350¾ F with pressure set at medium to high for 10 -15 seconds for applying to a direct print. Allow the foil and fabric to completely cool before peeling. For best results the color of the plastisol being "foiled" should be black or the complimentary color of the foil. This will help mask tarnishing and chipping as the foil wears. Prints decorated with foil are not as durable as an undecorated print, and should not be expected to withstand the punishment that a regular direct print or transfer can take. Some dulling of the foil should be expected. Garments should be hand washed using cool to lukewarm water and hung to dry.
ULON-2159 Union Unifoil Transfer Powder
UFOIL-M120 Silver
UFOIL-M220 Gold
UFOIL-M100 Copper
UFOIL-3000 Red
UFOIL-3111 Pink
UFOIL-5035 Royal Blue
UFOIL-6000 Green

Build-Up Buster
When added to plastisol inks, Build-Up Buster dramatically reduces the amount of ink that adheres to the bottom of the screen. This build up can lead to undesirable smearing while wet on wet printing. Add Build-Up Buster should be added in a 2 to 5% ratio by weight. Build-Up Buster can evaporate out of mixed inks, therefore inks should be covered with a tight lid for storage. Available in quarts and gallons.
UPLUS-9020 Build-Up Buster

Plastisol Thickener
This easy to use additive is designed to help the printer that has added too much reducer and would like to bring back the viscosity. Plastisol Thickener can be easily stirred in by hand, avoiding the mess of powder type thickeners. Should be added 1 to 5% by weight to ink. Available in quarts and gallons.
UPLUS-9114 Plastisol Thickener