Pavonine DSPCH-9070 Additive
Plasticharge Additive (DSPCH-9070) allows for bright, colorful, soft-hand prints on discharge-dyed garments by transforming selected plastisol inks into discharge inks. Plasticharge prints are uniquely water absorbent.

PRINTING INSTRUCTIONS: Force the ink into the substrate with heavy squeegee pressure. Print wet-on-wet. without flash. Accurate color values will appear after curing.Cure a minimum of 90 seconds at 320°F to activate discharge reaction produce a washable print. Evaporating water too quickly will stop the discharge reaction and result in dull colors.

MIXING INSTRUCTIONS: Step 1 Mix equal parts of Plastisol additive and a suitable Union Ink plastisol ink. Stir until completely mixed. Do not use mixing speed that are high enough to heat the ink. Mix only enough for a few days production. Step 2. Add 6% ZFS Discharge agent before printing. Mix until completely dissolved. Once the discharge agent is added, the ink has a pot life of 24 hours

Pavonine DSPCH-1000 White
Plasticharge White is a plastisol ink with discharge properties similar to water-based discharge inks. This white allows for bright, colorful, soft-hand prints on discharge-dyed garments. Plasticharge White is designed to provide the best available underbase print.

PRINTING INSTRUCTIONS: Print Discharge White first, forcing the ink well into the substrate with heavy squeegee pressure. Print wet on wet without flash. Color values will appear after curing. Cure a minimum of 90 seconds at 320°F to activate discharge reaction produce a washable print. Evaporating water too quickly will stop the discharge reaction and result in dull colors.

MIXING INSTRUCTIONS: Add 6% ZFS Discharge agent before printing. Mix until completely dissolved. Once the discharge agent is added, the ink has a pot life of 24 hours.

ALWAYS TEST PRINT BEFORE PRODUCTION