Features
• Heat cure or air dry
• Brilliant color range
• Washup with water
• Easy to print
• Low Odor
• Ready for Use
Opaque Colors
UPPPO-1000 Multi Purpose White
UPPPO-S10 Buttercup Yellow
UPPPO-S11 Matching Yellow
UPPPO-S12 Sunflower Yellow
UPPPO-S14 Harvest Gold
UPPPO-S18 Orange
UPPPO-S235 Flag Red
UPPPO-S24 Ruby Red
UPPPO-S25 Wine Red
UPPPO-S27 Matching Rhodamine
UPPPO-S30 Matching Purple
UPPPO-S295 Matching Violet
UPPPO-S31 Navy Blue
UPPPO-S33 Strong Royal
UPPPO-S36 Sky Blue
UPPPO-S34 Blueberry
UPPPO-S40 Emerald Green
UPPPO-S44 Bright Green
UPPPO-S48 Spring Green
UPPPO-S50 Cinnamon Brown
UPPPO-S54 Chestnut Brown
UPPPO-S58 Walnut Brown
UPPPO-S71 Black
Modifiers
UPPPC-9090 Pavoclear Extender
UPPPO-9090 Pavopaque B Base
Biodegradable Wash-Up
SYS-2500 Screen Wash
SYS-2550 Low Odor
Wash
SYS-2510 Screen Wash
Gel
Pakaging
Available in quarts,gallons and 5-gallon pails; 30 and 55 gallon
drums.
|
| TopForm |
| |
|
 |
|
| Opaque
Aqueous Textile Ink |
| PAVOPAQUE INK |
| Safe
and low odor water-based textile inks |
| Pavopaque textile inks are safe and extremely easy
to use, making them an ideal ink line for textile, school and hobby-craft
use. Truly ready for use opaque water base colors that require no
additional retarder to remain open for long periods in the screen
or no additives to reduce crocking. Excellent wash fastness and crock
resistance. Available in all 26 standard colors. |
|
SPECIFICATIONS
USES: For use on white or light pastel plus dark and black cottons,
blends, dress wear, linens, toweling, slipcovers, T-shirts, bedspreads
and hats.
FINISH: Equal
to fabric printed. Prints “breathe” well.
OPACITY: All colors
are deep strength opaque colors. Can be screen printed one color
on another "wet-on-wet" for multicolor
printing.
DRYING TIME:
All moisture and water must be evaporated from cloth before drying/curing
begins.
Air-dries to touch in about 30 to 40 minutes,
but can take up to 30 days to reach full cure. (All colors must be
heat set.) Jet dries in about 90 seconds at 320 F. If sufficient oven
conditions can’t be met, add 1.5% PAVOFIX A to insure wash fastness
in most systems. Use PAVOFIX H for heatcure.
SCREEN FABRIC: Use monofilament polyester depending on material being
printed. 74-156 mesh for normal printing.
SCREEN COATING, FILM, BLOCKOUT: Use water resistant emulsion, preferable
with hardener. Do not under expose!
MODIFIERS: Use Pavoclear Extender or Pavopaque B to let down colors.
To improve opacity up to 2% Pavassist antiwicking agent can be added
to improve brightness, but testing to make sure adhesion is still adequate
is required. Reduce with a minimum amount of water to prevent hanging
up on the squeegee and flood bar.
PRINT TECHNIQUE: Minimum squeegee pressure is required. Minimum off
contact is recommended, with very tightly stretched screens.
SQUEEGEE: Soft to medium in the 60 to 70 range.
WASHUP: Use water to clean screens and tools or biodegradable washups
2500, 2550 or 2510 screen wash gel for badly dried in screens.
ALWAYS TEST PRINT BEFORE PRODUCTION
|
|
