Features
• Water repellent nylon
• Brilliant color range
• Washup with water
• Easy to print
Opaque Colors
UNYOP-1020 White
UNYOP-MS11 Matching Yellow
UNYOP-SS12 Sunflower
UNYOP-S20 Matching Warm Red
UNYOP-SS235 Flag Red
UNYOP-SS24 Ruby Red
UNYOP-S25 Wine Red
UNYOP-MS36 Sky Blue
UNYOP-MS44 Bright Green
UNYOP-S71 BlackMetallics
UNYOP-M200 NyloGold
Modifiers
UNYCL-9030 Nylo-Clear Extender
UNYOP -9090 Nylo-Opaque Base
Fixatives
UPPPA-FIX C
Nylo Reflect Colors
UNYRF-1000 White*
UNYRF-1500 Gray
UNYRF-2000 Yellow*
UNYRF-3000 Red
UNYRF-3070 Warm Red
UNYRF-5000 New Orleans Blue
UNYRF-5003 Blue R/S
UNYRF-M120 Silver
* Best used on white or light
colored substrate
Modifiers
UNYRF-9070 Base
Fixatives
UPPPC-FIXRF Reflective Fixative
Biodegradable Wash-Up
SYS-2500 Screen
Wash
SYS-2550 Low
Odor Wash
SYS-2510 Screen
Wash Gel
Pakaging
Available in quarts,gallons and 5-gallon pails; 30 and 55 gallon drums.
|
| TopForm |
| |
|
 |
|
| Aqueous
Textile Ink For Nylon |
| NYLO-PAQUE |
| Safe
and low odor water-based textile inks |
| Nylo-Opaque
textile inks are safe and extremely easy to use, making them an ideal
ink line for textile, school and hobby-craft use. These inks adhere
to most water repellent nylons as well as denim, poplin, twill and
vinyl (with the addition of 2% FIX C). Can also be used on cottons.
blends, etc. Nylo-Opaque is as close to a universal textile ink as
possible. Available in all 32 standard colors. |
|
SPECIFICATIONS
USES: For use on nylon and water repellant treaed nylon. NOTE! water
repellant treatments vary greatly and should be tested for adhesion
before a production run.
FINISH: Equal to fabric printed. Prints “breathe” well.
OPACITY: All colors are opaque enough for medium or pastel colors.
When printing on dark colors, the equivalent of 2% or .2% colors
on the Pavonine color chart should be used. Fluorescent colors are
best used on light or medium fabrics.
DRYING TIME: A minumum
of 90 seconds and a minimum of 320 F in a well vented oven are
required to set Nylo-Opaque by heat alone.
May be used with a lessor oven on no oven with the addition of
1% to 2% Fix C. Mix only what can be used in four hours, do not
store
catalyzed inks, do not allow catalyzed inks to dry in the screen.
Higher percentages of Fix C (up to 4%) will inprove adhesion but
cut pot life.
SCREEN FABRIC: Use monofilament polyester 110 range recommended.
SCREEN COATING, FILM, BLOCKOUT: Use water resistant emulsion, preferable
with hardener. Do not under expose!
MODIFIERS: Up to 2% Pavassist Smooth antiwicking agent can be added
to improve brightnes, but testing to make sure adhesion is still
adequate is required. Reduce with a minimum amount of water to prevent
hanging up on the squeegee and flood bar.
SQUEEGEE: Medium in the 60 to 70 range.
WASHUP: Use water to clean screens and tools or biodegradable washups
2500, 2550 or 2510 screen wash gel for badly dried in screens.
ALWAYS TEST PRINT BEFORE PRODUCTION
|
|
